Tekmar Controllers Will Save You Money on Your Heating Bill

Right after your reset controller has been installed you will begin to save energy from day one. Within the first couple of days you will notice the difference as your boiler won’t fire as often and your home will not have those hot or cold temperature spikes. After the first month, you’ll be pleasantly surprised when you check your fuel tank level.

Tekmar Boiler Controls will work with any hot water heating system regardless of the fuel source, be it oil, propane or wood. We’ve reduced our wood consumption here at the farm by 20%. That’s 4 cords of wood, which equals 600 gallons of fuel oil or 880 gallons of propane. With savings like this, our payback was less than one heating season.

There are several options that can be incorporated with your Tekmar Boiler Control to further your energy savings from an indoor temperature sensor that connects to the microprocessor controller to further adjust the system water temperature based upon actual indoor space temperature vs. outdoor temperatures. There is also a microprocessor timer with set back programs that allows for occupied/unoccupied modes.
More Info>>

Installations for Heat Only Start at $650.00

Installations for Heat and Domestic Hot Water Start at $850.00